RUS  ENG
Full version
PEOPLE

Razorenov Sergei Vladimirovich

Publications in Math-Net.Ru

  1. Submicrosecond strength $(\alpha+\beta)$ of titanium alloy VT22 under plane shock wave loading

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 52:1 (2026),  14–17
  2. The spall strength of MPG-8 and I-3 graphites under shock loading up to 2 GPa

    Zhurnal Tekhnicheskoi Fiziki, 95:4 (2025),  771–778
  3. Phase transition and strength properties of eutectic lead-bismuth alloy in the temperature range of 20–110$^\circ$C under shock loading

    Zhurnal Tekhnicheskoi Fiziki, 95:1 (2025),  114–121
  4. Влияние термообработки на динамическую прочность алюминиевого сплава АК$6$ в диапазоне температур $20$–$500^{\circ}$C

    TVT, 63:4 (2025),  502–513
  5. The spall strength and hugoniot elastic limit of iron-nickel alloys of meteoritic origin

    Zhurnal Tekhnicheskoi Fiziki, 94:6 (2024),  863–870
  6. Influence of temperature on shock compressibility and spall strength of ABS under weak shock waves

    Zhurnal Tekhnicheskoi Fiziki, 94:1 (2024),  125–131
  7. The mechanical response of pre-strained [100] aluminium single crystals under plane impact

    Zhurnal Tekhnicheskoi Fiziki, 93:11 (2023),  1580–1588
  8. Spall strength of polycarbonate at a temperature of 20–185$^\circ$C

    Zhurnal Tekhnicheskoi Fiziki, 93:5 (2023),  666–672
  9. The effect of temperature on the Hugoniot elastic limit and the spall strength of a lead-bismuth alloy at the pressure of shock compression up to 2.4 GPa

    Zhurnal Tekhnicheskoi Fiziki, 93:3 (2023),  380–386
  10. Compression wave structure under plane impact deformation of a molybdenum single crystal [100] with different initial density of dislocations

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 48:9 (2022),  27–31
  11. Investigation of the rate dependences of the stress of plastic flow and fracture of steel 09Г2СА-А at normal and elevated temperatures

    Zhurnal Tekhnicheskoi Fiziki, 91:11 (2021),  1698–1706
  12. Spalling in sapphire in different crystallographic directions under shock compression

    Zhurnal Tekhnicheskoi Fiziki, 90:6 (2020),  961–964
  13. High-rate deformation and fracture of 15Kh2NMFA steel under impact loading at normal and elevated temperatures

    Zhurnal Tekhnicheskoi Fiziki, 90:3 (2020),  441–449
  14. Joint effect of small additives of carbon nanoparticles of different morphologies on the mechanical characteristics of cross-linked polyurethanes under static and dynamic loads

    Zhurnal Tekhnicheskoi Fiziki, 89:6 (2019),  919–926
  15. Influence of high-temperature annealing on the resistance to high strain rate and fracture of tantalum at temperatures of 20 and 500$^{\circ}$C

    Zhurnal Tekhnicheskoi Fiziki, 89:5 (2019),  725–730
  16. Elastic precursor decay and spallation in nonporous tungsten carbide ceramics

    Zhurnal Tekhnicheskoi Fiziki, 89:3 (2019),  392–396
  17. The dynamic strength of ZrO$_{2}$-based ceramic materials manufactured by additive technology

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 45:19 (2019),  28–32
  18. Evolution of shock waves in hot-pressed ceramics of boron carbide and silicon carbide

    Zhurnal Tekhnicheskoi Fiziki, 88:12 (2018),  1813–1819
  19. The influence of the cobalt content on the strength properties of tungsten carbide ceramics under dynamic loads

    Zhurnal Tekhnicheskoi Fiziki, 88:3 (2018),  368–373
  20. The effect of small additions of carbon nanotubes on the mechanical properties of epoxy polymers under static and dynamic loads

    Zhurnal Tekhnicheskoi Fiziki, 88:1 (2018),  34–41
  21. The influence of the structure of a magnesium–aluminum nitride metal-matrix composite on the resistance to deformation under quasi-static and dynamic loading

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 44:20 (2018),  21–29
  22. Strength properties of aluminum-oxide ceramics prepared by the additive manufacturing method under shock-wave loading

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 44:19 (2018),  96–104
  23. The formation of elastoplastic fronts and spall fracture in АМг6 alloy under shock-wave loading

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 44:18 (2018),  39–46
  24. Evaluation of viscosity of $\rm Bi$–$\rm Pb$ melt $(56.5\%$–$43.5\%)$ by the width of a weak shock wave

    TVT, 56:5 (2018),  711–714
  25. Solidification of water under dynamic compression and its influence on the evolutions of shock waves

    Chebyshevskii Sb., 18:3 (2017),  466–474
  26. Peculiarities of fracture in submicrocrystalline Al–Mg–Mn alloy under impact compression

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 43:10 (2017),  34–40
  27. Evaluation of glycerol viscosity through the width of a weak shock wave

    TVT, 55:3 (2017),  380–385
  28. Unusual plasticity and strength of metals at ultra-short load durations

    UFN, 187:5 (2017),  525–545
  29. Change of the kinetics of shock-wave deformation and fracture of VT1-0 titanium as a result of annealing

    Fizika Tverdogo Tela, 58:6 (2016),  1153–1160
  30. Temperature–rate dependences of the flow stress and the resistance to fracture of a VT6 titanium alloy under shock loading at a temperature of 20 and 600$^\circ$C

    Zhurnal Tekhnicheskoi Fiziki, 86:8 (2016),  111–117
  31. Dissipative processes under the shock compression of glass

    Zhurnal Tekhnicheskoi Fiziki, 86:3 (2016),  70–76
  32. Influence of the reversible $\alpha$–$\varepsilon$ phase transition and preliminary shock compression on the spall strength of armco iron

    Zhurnal Tekhnicheskoi Fiziki, 86:1 (2016),  86–92
  33. Anomalous compressibility of quartz glass within the tensile stress domain and at elevated temperatures

    TVT, 54:5 (2016),  701–706
  34. Influence of the temperature-induced martensitic-austenitic transformation on the strength properties of high-alloy steels under dynamic loading

    Fizika Goreniya i Vzryva, 51:1 (2015),  143–149
  35. Effect of structural factors on mechanical properties of the magnesium alloy Ma2-1 under quasi-static and high strain rate deformation conditions

    Fizika Tverdogo Tela, 57:2 (2015),  321–327
  36. Dynamic strength of tin and lead melts

    Pis'ma v Zh. Èksper. Teoret. Fiz., 102:8 (2015),  615–619
  37. Hardening of metals and alloys during shock compression

    Zhurnal Tekhnicheskoi Fiziki, 85:7 (2015),  77–82
  38. Dynamic strength of reaction-sintered boron carbide ceramic

    Zhurnal Tekhnicheskoi Fiziki, 85:6 (2015),  77–82
  39. Peculiarities of the elastic-plastic transition and failure in polycrystalline vanadium under shock-wave loading conditions

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 41:12 (2015),  32–39
  40. Deformation resistance and fracture of iron over a wide strain rate range

    Fizika Tverdogo Tela, 56:8 (2014),  1518–1522
  41. Effect of a fullerene C$_{60}$ addition on the strength properties of nanocrystalline copper and aluminum under shock-wave loading

    Zhurnal Tekhnicheskoi Fiziki, 84:3 (2014),  69–74
  42. Elastic-plastic deformation and fracture of shock-compressed single-crystal and polycrystalline copper near melting

    Zhurnal Tekhnicheskoi Fiziki, 83:10 (2013),  44–49
  43. High strain rate deformation and fracture of the magnesium alloy Ma2-1 under shock wave loading

    Fizika Tverdogo Tela, 54:5 (2012),  1012–1018
  44. Resistance to dynamic deformation and fracture of tantalum with different grain and defect structures

    Fizika Tverdogo Tela, 54:4 (2012),  742–749
  45. Behavior of the nickel-titanium alloys with the shape memory effect under conditions of shock wave loading

    Fizika Tverdogo Tela, 53:4 (2011),  768–773
  46. Spall fracture in sapphire

    Pisma v Zhurnal Tekhnicheskoi Fiziki, 37:7 (2011),  8–15
  47. Strength and failure of LK7 borosilicate glass under shock compression

    Zhurnal Tekhnicheskoi Fiziki, 80:6 (2010),  85–89
  48. Submicrosecond polymorphic transformations accompanying shock compression of graphite

    TVT, 48:6 (2010),  845–853
  49. Orientation effect on the parameters of the polymorphic transformation of graphite under shock compression

    Pis'ma v Zh. Èksper. Teoret. Fiz., 88:3 (2008),  254–257
  50. Shock waves in condensed-state physics

    UFN, 177:8 (2007),  809–830
  51. Iron at high negative pressures

    Pis'ma v Zh. Èksper. Teoret. Fiz., 80:5 (2004),  395–397
  52. The compressibility of single crystals of zinc in the region of positive and negative pressures

    TVT, 42:2 (2004),  262–268
  53. Shock compression and spalling of cobalt at normal and elevated temperatures

    Fizika Goreniya i Vzryva, 38:5 (2002),  119–123
  54. Front structure of a weak shock wave in dense composites

    Prikl. Mekh. Tekh. Fiz., 40:3 (1999),  161–167
  55. Effect of an inert high-modulus ceramic wall on detonation propagation in solid explosive charges

    Fizika Goreniya i Vzryva, 30:5 (1994),  107–114
  56. Viscoelasticity of aluminum in rarefaction waves

    Prikl. Mekh. Tekh. Fiz., 29:6 (1988),  67–70
  57. Структура фронта ударной волны в металлах

    TVT, 26:6 (1988),  1220–1221
  58. USE OF LASER INTERFEROMETRIC MEASUREMENTS OF SPEED IN EXPLOSIVE EXPERIMENTS

    Zhurnal Tekhnicheskoi Fiziki, 57:5 (1987),  918–924
  59. Measurement of the viscosity of copper in shock loading

    TVT, 25:1 (1987),  65–69
  60. TITANIUM BREAKDOWN DESTRUCTION BY SHOCK-WAVES OF DIFFERENT INTENSITY

    Zhurnal Tekhnicheskoi Fiziki, 56:3 (1986),  586–588
  61. MEASUREMENT OF THE SHOCK-WAVE WIDTH PROFILE IN COPPER

    Zhurnal Tekhnicheskoi Fiziki, 55:9 (1985),  1816–1818
  62. Kinetics of spallation rupture in the aluminum alloy AMg6M

    Prikl. Mekh. Tekh. Fiz., 25:5 (1984),  60–64
  63. Thermo-physical and gas-dynamic studies of the meteorite shield for the Vega spacecraft

    TVT, 22:5 (1984),  964–983

© Steklov Math. Inst. of RAS, 2026