RUS  ENG
Full version
PEOPLE

Novikov Stanislav Aleksandrovich

Publications in Math-Net.Ru

  1. Tunable CO2 laser emitting sequential and hot transitions

    Kvantovaya Elektronika, 34:9 (2004),  819–822
  2. Experimental-theoretical investigation of the hydroexplosive forming of structural shells

    Prikl. Mekh. Tekh. Fiz., 43:5 (2002),  176–181
  3. Mechanism of formation of a fast gas jet

    Fizika Goreniya i Vzryva, 37:5 (2001),  98–103
  4. Damping properties of sequoia, birch, pine, and aspen under shock loading

    Prikl. Mekh. Tekh. Fiz., 42:2 (2001),  23–32
  5. Flow expansion behind a shock wave discharged from a channel

    TVT, 39:1 (2001),  123–127
  6. Dynamic deformation of aluminum alloy AMg–6 at normal and higher temperatures

    Prikl. Mekh. Tekh. Fiz., 41:6 (2000),  139–143
  7. Shear strength of aluminum upon shockless compression

    Fizika Goreniya i Vzryva, 35:6 (1999),  115–118
  8. Strain diagrams for uranium and its alloy with molybdenum in dynamic uniaxial compression and tension and at elevated temperatures

    Prikl. Mekh. Tekh. Fiz., 40:6 (1999),  197–203
  9. Gasdynamic flow of explosion products in the channel of a slightly extended flat charge

    TVT, 37:2 (1999),  337–339
  10. Character of the shock loading under dynamic compaction of ultradispersed diamonds

    Fizika Goreniya i Vzryva, 34:3 (1998),  105–106
  11. Effect of the loading rate, angle of orientation of fibers, and temperature on the strength properties of birch

    Prikl. Mekh. Tekh. Fiz., 39:6 (1998),  154–158
  12. Elimination of jets formed by the interaction of detonation waves

    Fizika Goreniya i Vzryva, 33:4 (1997),  103–108
  13. Mechanisms of spalling of metals in the fast space-heating regime in submicrosecond and submillimicrosecond ranges of durability

    Prikl. Mekh. Tekh. Fiz., 37:6 (1996),  105–115
  14. Determination of fracture toughness and fracture energy of brittle materials under impact wedging

    Prikl. Mekh. Tekh. Fiz., 37:4 (1996),  149–159
  15. Dynamic compaction of ultradisperse diamonds

    Fizika Goreniya i Vzryva, 31:5 (1995),  136–138
  16. Effect of heating on the cleavage fracture of certain explosive compounds

    Fizika Goreniya i Vzryva, 31:5 (1995),  129–131
  17. Study of the stressed state of shock-compressed solids by the method of principal stresses

    Fizika Goreniya i Vzryva, 31:5 (1995),  114–121
  18. Desensitization of pressed explosive compositions based on TNT, RDX, and HMX under double shock-wave loading

    Fizika Goreniya i Vzryva, 31:4 (1995),  89–92
  19. Determination of the dynamic coefficient of friction of sandy ground on a rigid wall

    Prikl. Mekh. Tekh. Fiz., 36:4 (1995),  185–187
  20. Study of the Bauschinger effect under dynamic loading

    Prikl. Mekh. Tekh. Fiz., 36:4 (1995),  163–169
  21. The formation of smooth spalls in steel during the interaction of glancing detonation waves

    Fizika Goreniya i Vzryva, 30:4 (1994),  138–140
  22. An investigation of the compressibility of sandy soil under impact-wave loading

    Prikl. Mekh. Tekh. Fiz., 34:4 (1993),  55–58
  23. Propagation of a spherical shock wave in sandy soil

    Prikl. Mekh. Tekh. Fiz., 34:2 (1993),  10–11
  24. Dynamics of viscoelastic spherical shells during internal explosive loading

    Fizika Goreniya i Vzryva, 28:4 (1992),  91–95
  25. Constitutive equation for describing high strain rates of Al and Mg in a shock wave

    Fizika Goreniya i Vzryva, 28:1 (1992),  84–89
  26. Study of the effect of explosive shock loads on soft soil

    Prikl. Mekh. Tekh. Fiz., 33:2 (1992),  149–152
  27. Time-temperature regularities of the dynamic failure of some metals in rapid volumetric heating mode

    Dokl. Akad. Nauk SSSR, 317:6 (1991),  1376–1379
  28. Study of structural changes in specimens of different materials preserved after the action of pulsed high pressures

    Fizika Goreniya i Vzryva, 27:4 (1991),  109–116
  29. The load on an obstacle from a sliding detonation in a thin layer of explosive

    Fizika Goreniya i Vzryva, 27:4 (1991),  94–99
  30. Devices of the explosive mechanical testing of materials and structures

    Fizika Goreniya i Vzryva, 27:4 (1991),  87–94
  31. Radial instability of one- and two-layer cylindrical shells during impulsive compression

    Prikl. Mekh. Tekh. Fiz., 32:1 (1991),  77–81
  32. Flows in planar transmitted and reflected non-stationary air shock waves produced by explosive charges

    Fizika Goreniya i Vzryva, 26:6 (1990),  143–145
  33. Strength of aluminum, copper and steel at front of shock wave

    Fizika Goreniya i Vzryva, 25:5 (1989),  126–132
  34. Explosive-type units for mechanical testing

    Fizika Goreniya i Vzryva, 25:4 (1989),  147–151
  35. Kinetic approach to description of the elastoplastic properties of materials in shock loading

    Fizika Goreniya i Vzryva, 24:4 (1988),  109–114
  36. Recording the spalling failure of copper and lead with explosive loading

    Fizika Goreniya i Vzryva, 24:1 (1988),  89–92
  37. Shock compression of porous materials

    Prikl. Mekh. Tekh. Fiz., 29:6 (1988),  57–61
  38. Study of elastoplastic deformation for cylindrical shells with axial shock loading

    Prikl. Mekh. Tekh. Fiz., 29:3 (1988),  150–153
  39. Study of microdamage accumulation with spalling in titanium alloy VT14

    Prikl. Mekh. Tekh. Fiz., 29:2 (1988),  128–131
  40. Strength and failure of aluminum alloy AMg6 with shock-wave loading

    Prikl. Mekh. Tekh. Fiz., 29:2 (1988),  121–128
  41. Melting of lead in shock compression

    Prikl. Mekh. Tekh. Fiz., 29:1 (1988),  149–151
  42. Correlation of the relaxation and energy characteristics of glassy polymer fracture at high loading rates

    Dokl. Akad. Nauk SSSR, 286:6 (1986),  1320–1323
  43. Rarefaction shock waves in iron from explosive loading

    Fizika Goreniya i Vzryva, 22:3 (1986),  91–99
  44. Shear strength of solids and its effect on plane shock wave propagation

    Fizika Goreniya i Vzryva, 22:2 (1986),  114–120
  45. Measurement of the velocities of current-conducting shells with a sensor of the electromagnetic type

    Fizika Goreniya i Vzryva, 22:1 (1986),  71–74
  46. Strength with quasistatic and shock-wave loading

    Fizika Goreniya i Vzryva, 21:6 (1985),  77–85
  47. Time dependence of the pressures for detonation initiation in tnt and th 50/50 by nonstationary shock waves

    Fizika Goreniya i Vzryva, 21:4 (1985),  127–129
  48. Study of the unloading of steel shock-compressed above the phase-transition point

    Prikl. Mekh. Tekh. Fiz., 26:6 (1985),  142–144
  49. Shock-wave initiation of solid heterogeneous explosives

    Fizika Goreniya i Vzryva, 20:4 (1984),  77–85
  50. Statistical estimate of brittle strength with allowance for crack resistance

    Prikl. Mekh. Tekh. Fiz., 25:6 (1984),  135–138
  51. Generation of a mechanical impulse by electrical explosion of a conductor

    Fizika Goreniya i Vzryva, 19:3 (1983),  124–126
  52. Investigation of the influence of specimen diameter on the explosive transformation development behind a weak nonstationary shock front

    Fizika Goreniya i Vzryva, 19:3 (1983),  122–123
  53. Investigation of shear stress on a shock front in solid high explosives (HE)

    Fizika Goreniya i Vzryva, 19:3 (1983),  120–122
  54. Critical conditions for microdamage initiation in a spalling metal

    Prikl. Mekh. Tekh. Fiz., 24:4 (1983),  151–158
  55. Time dependence of fracture stresses during spall in copper, nickel, and titanium

    Prikl. Mekh. Tekh. Fiz., 24:3 (1983),  136–139
  56. Effect of shock-wave exit angle on a free surface on fracture formation in metals

    Prikl. Mekh. Tekh. Fiz., 24:3 (1983),  131–136
  57. Rupture and viscosity of lead during spall

    Prikl. Mekh. Tekh. Fiz., 23:6 (1982),  108–114
  58. Effect of loading prehistory on mechanical properties of steel in single-axis extension

    Prikl. Mekh. Tekh. Fiz., 23:6 (1982),  98–103
  59. Determination of the spall strength from measured values of the specimen free-surface velocity

    Prikl. Mekh. Tekh. Fiz., 23:5 (1982),  126–129
  60. Axial dynamic compression of tubular metallic crushers

    Prikl. Mekh. Tekh. Fiz., 23:1 (1982),  156–160
  61. Effect of temperature on spall of polymeric materials

    Prikl. Mekh. Tekh. Fiz., 23:1 (1982),  143–150
  62. Investigation of TNT and TH 50/50 initiation by short-duration shocks

    Fizika Goreniya i Vzryva, 17:6 (1981),  90–95
  63. Применение кварцевых датчиков давления для исследования ударно-волновых процессов

    Fizika Goreniya i Vzryva, 17:3 (1981),  146–148
  64. Shear stress and spall strength of materials under shock loads (review)

    Prikl. Mekh. Tekh. Fiz., 22:3 (1981),  109–120
  65. Failure in materials on loading with the explosion of a sheet explosive charge

    Prikl. Mekh. Tekh. Fiz., 22:2 (1981),  112–118
  66. Generation of electrical signals in elastic waves propagating in metal rods

    Prikl. Mekh. Tekh. Fiz., 22:2 (1981),  108–112
  67. Peculiarities in measurement of pressure pulses with a dielectric sensor

    Prikl. Mekh. Tekh. Fiz., 22:2 (1981),  103–105
  68. Расчет взрывного нагружающего устройства для создания импульса давления заданных параметров

    Fizika Goreniya i Vzryva, 16:6 (1980),  111–113
  69. Разрушение преград над областями столкновения детонационных волн

    Fizika Goreniya i Vzryva, 16:3 (1980),  143–145
  70. Investigation of shear stresses in metals on a shock front

    Prikl. Mekh. Tekh. Fiz., 21:6 (1980),  95–99
  71. Influence of temperature on the critical conditions of spalling fracture of metals

    Prikl. Mekh. Tekh. Fiz., 21:4 (1980),  136–140
  72. Investigation of the process of explosive transformation of the composite TG 50/50 behind a nonstationary shock front

    Fizika Goreniya i Vzryva, 15:5 (1979),  139–141
  73. Propagation of shock waves in foamed polystyrene

    Prikl. Mekh. Tekh. Fiz., 20:6 (1979),  140–144
  74. Investigation of the propagation and interaction of fast cracks in plexiglas

    Prikl. Mekh. Tekh. Fiz., 20:4 (1979),  109–112
  75. Effect of specimen temperature on the breaking point for splitting-off in AMG-6 aluminum alloy

    Prikl. Mekh. Tekh. Fiz., 20:3 (1979),  133–137
  76. Use of a photometric method to measure the displacement of metal shells under an explosive load

    Prikl. Mekh. Tekh. Fiz., 19:4 (1978),  60–63
  77. Dependence of recoil impulse from a rigid barrier under sliding conditions of detonation of an explosive layer

    Fizika Goreniya i Vzryva, 13:5 (1977),  771–774
  78. Detonation wave collision on surface of an inert material

    Fizika Goreniya i Vzryva, 13:4 (1977),  600–606
  79. Effects of initiation pressure for TH 50/50 on the pulse length in the collision of a thin steel plate

    Fizika Goreniya i Vzryva, 13:2 (1977),  294–296
  80. Effect of critical shear stresses behind the front of a shock wave on the formation of fragments

    Prikl. Mekh. Tekh. Fiz., 18:2 (1977),  143–147
  81. Utilization of the electron-inertial effect in shock loading to measure rod strain

    Prikl. Mekh. Tekh. Fiz., 18:2 (1977),  139–143
  82. Obtaining the load-extension curves of samples subjected to an explosion load

    Prikl. Mekh. Tekh. Fiz., 16:1 (1975),  184–186
  83. Scale effect in the explosive destruction of closed steel vessels

    Fizika Goreniya i Vzryva, 8:1 (1972),  124–129
  84. Effect of the pressure of shock compression on the critical shear stresses in metals

    Prikl. Mekh. Tekh. Fiz., 11:6 (1970),  107–110
  85. The behavior of steel shells when charges of explosive detonate inside them

    Prikl. Mekh. Tekh. Fiz., 9:6 (1968),  94–98

© Steklov Math. Inst. of RAS, 2026