Orlova Tat'yana Sergeevna

Publications in Math-Net.Ru

1. Optimization of physical and mechanical properties of ultrafine-grained Al–Mg–Zr alloy for electrical purposes
   
   Fizika Tverdogo Tela, 67:3 (2025),  435–443
2. Increased specific resistivity of grain boundaries in nonequilibrium state in ultrafine-grained Al–Cu–Zr alloy
   
   Pisma v Zhurnal Tekhnicheskoi Fiziki, 51:7 (2025),  46–49
3. Anomalous mechanical behavior of ultrafine-grained Al–Mg–Zr alloy at low temperature
   
   Fizika Tverdogo Tela, 66:6 (2024),  933–945
4. Influence of the grain boundary state on the plasticization effect in ultrafine-grained Al–0.4Zr alloy
   
   Fizika Tverdogo Tela, 65:9 (2023),  1572–1578
5. Micromechanism of plastic deformation enhancement in ultrafine-grained Al–Cu–Zr alloy after annealing and additional deformation
   
   Fizika Tverdogo Tela, 65:5 (2023),  874–878
6. Influence of strain rate on the effect of plasticization of high-strength ultrafine-grained Al–Cu–Zr alloy
   
   Fizika Tverdogo Tela, 64:6 (2022),  683–690
7. Influence of deformation temperature on the effect of high plasticity implementation in ultrafine-grained Al-1.5Cu alloy
   
   Fizika Tverdogo Tela, 63:10 (2021),  1585–1593
8. Peculiarities of strengthening of Al-Cu-Zr alloy structured by severe plastic deformation
   
   Fizika Tverdogo Tela, 63:10 (2021),  1572–1584
9. A model of pore dissolution at grain boundaries during annealing of an ultra-fine-grained aluminum alloy
   
   Pisma v Zhurnal Tekhnicheskoi Fiziki, 47:18 (2021),  40–42
10. Mechanism of implementation of high ductility in ultrafine-grained aluminum after annealing and subsequent deformation
    
    Fizika Tverdogo Tela, 62:11 (2020),  1865
11. Mechanical properties of ultrafine-grained aluminum in the temperature range 4.2–300 K
    
    Fizika Tverdogo Tela, 62:6 (2020),  930–936
12. The effect of annealing and additional deformation on the mechanical properties of ultrafine-grained Al–1.5Cu alloy
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 46:18 (2020),  30–34
13. The effect of additional severe plastic deformation at elevated temperatures on the microstructure and functional properties of the ultrafine-grained Al–0.4Zr alloy
    
    Fizika Tverdogo Tela, 61:12 (2019),  2477–2487
14. Mechanism of hardening of ultrafine-grained aluminum after annealing
    
    Fizika Tverdogo Tela, 61:10 (2019),  1836–1844
15. A new hybrid material: monolithic biomorphic carbon/nickel nanoparticles for energy storage devices
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 45:16 (2019),  18–22
16. Effect of annealing on the microstructure and mechanical properties of ultrafine-grained commercially pure Al
    
    Fizika Tverdogo Tela, 59:10 (2017),  1949–1955
17. Features of electrical properties of BE-C(Fe) biocarbons carbonized in the presence of an Fe-containing catalyst
    
    Fizika Tverdogo Tela, 59:4 (2017),  688–694
18. Effect of activation on the porous structure and the strain and strength properties of beech wood biocarbon
    
    Fizika Tverdogo Tela, 59:1 (2017),  110–115
19. Microstructure, elastic, and inelastic properties of biomorphic carbons carbonized using a Fe-containing catalyst
    
    Fizika Tverdogo Tela, 58:12 (2016),  2393–2399
20. Strength and microplasticity of biocarbons prepared by carbonization in the presence of a catalyst
    
    Fizika Tverdogo Tela, 58:4 (2016),  685–691
21. Thermal conductivity of partially graphitized biocarbon obtained by carbonization of medium-density fiberboard in the presence of a Ni-based catalyst
    
    Fizika Tverdogo Tela, 58:1 (2016),  200–206
22. Influence of the microstructure on the physicomechanical properties of the aluminum alloy Al–Mg–Si nanostructured under severe plastic deformation
    
    Fizika Tverdogo Tela, 57:10 (2015),  1998–2004
23. Specific features of the electrical properties in partially graphitized porous biocarbons of beech wood
    
    Fizika Tverdogo Tela, 57:9 (2015),  1703–1708
24. Microstructure, elastic and inelastic properties of partially graphitized biomorphic carbons
    
    Fizika Tverdogo Tela, 57:3 (2015),  571–577
25. Elastic models of defects in two-dimensional crystals
    
    Fizika Tverdogo Tela, 56:12 (2014),  2480–2485
26. Thermal conductivity of the amorphous and nanocrystalline phases of the beech wood biocarbon nanocomposite
    
    Fizika Tverdogo Tela, 56:11 (2014),  2269–2273
27. Thermal conductivity at the amorphous-nanocrystalline phase transition in beech wood biocarbon
    
    Fizika Tverdogo Tela, 56:5 (2014),  1030–1038
28. Effect of carbonization temperature on the microplasticity of wood-derived biocarbon
    
    Fizika Tverdogo Tela, 56:3 (2014),  522–528
29. Structure-mediated transition in the behavior of elastic and inelastic properties of beach tree bio-carbon
    
    Fizika Tverdogo Tela, 55:9 (2013),  1771–1777
30. Heat capacity of Bio-SiC and SiC/Si ecoceramics prepared from white eucalyptus, beech, and sapele tree wood
    
    Fizika Tverdogo Tela, 55:2 (2013),  409–414
31. Thermopower of Bio-SiC and SiC/Si ecoceramics prepared from sapele tree wood
    
    Fizika Tverdogo Tela, 55:1 (2013),  44–49
32. Electrical resistivity and thermal conductivity of SiC/Si ecoceramics prepared from sapele wood biocarbon
    
    Fizika Tverdogo Tela, 54:10 (2012),  2003–2011
33. Thermal conductivity of high-porosity heavily doped biomorphic silicon carbide prepared from sapele wood biocarbon
    
    Fizika Tverdogo Tela, 54:8 (2012),  1623–1629
34. Structure, electrical resistivity, and thermal conductivity of beech wood biocarbon produced at carbonization temperatures below 1000$^\circ$C
    
    Fizika Tverdogo Tela, 53:11 (2011),  2278–2286
35. Thermopower of beech wood biocarbon
    
    Fizika Tverdogo Tela, 53:11 (2011),  2133–2137
36. Heat capacity and phonon mean free path in the biocarbon matrix of beech
    
    Fizika Tverdogo Tela, 53:8 (2011),  1658–1662
37. Specific features of electrical properties of porous biocarbons prepared from beech wood and wood artificial fiberboards
    
    Fizika Tverdogo Tela, 53:2 (2011),  259–265
38. Effect of a strong electric field on the conductivity of $\mathrm{YBaCuO}$ htsc ceramics
    
    Fizika Tverdogo Tela, 34:8 (1992),  2482–2486
39. Insitu X-ray diffraction studies of strained $\mathrm{LiF}$ crystals
    
    Fizika Tverdogo Tela, 34:7 (1992),  2107–2110
40. Effect of uniaxial compression on the I-characteristics of the high-$T_{c}$ $\mathrm{YBa}_{2}\mathrm{Cu}_{3}\mathrm{O}_{7-x}$ films
    
    Fizika Tverdogo Tela, 34:3 (1992),  879–881
41. Differential scanning calorimetric study of $\mathrm{Sm}_{1-x}\mathrm{Gd}_{x}\mathrm{S}$ single crystals
    
    Fizika Tverdogo Tela, 34:1 (1992),  119–123
42. Effect of stress on the properties of bismuth-based and yttrium-based HTSC ceramics
    
    Fizika Tverdogo Tela, 33:12 (1991),  3595–3597
43. Positron annihilation in $\mathrm{YBa}_{2}\mathrm{Cu}_{3}\mathrm{O}_{7-x}$-based high-$T_{c}$ superconductors
    
    Fizika Tverdogo Tela, 33:10 (1991),  3016–3020
44. Effect of structure on the properties of the superconducting ceramic $\mathrm{Y}$–$\mathrm{Ba}$–$\mathrm{Cu}$–$\mathrm{O}$
    
    Fizika Tverdogo Tela, 33:1 (1991),  166–173
45. Microhardness of various high-$T_{c}$ superconducting single crystals
    
    Fizika Tverdogo Tela, 32:10 (1990),  3163–3165
46. Mechanical load-induced change in the characteristics of the superconducting transition in $\mathrm{Y}$–$\mathrm{Ba}$–$\mathrm{Cu}$–$\mathrm{O}$
    
    Fizika Tverdogo Tela, 32:4 (1990),  1031–1037
47. Semiconductor-metal phase transition in uniaxially compressed $\mathrm{Sm}_{0.86}\mathrm{Cd}_{0.14}\mathrm{S}$
    
    Fizika Tverdogo Tela, 29:12 (1987),  3683–3685
48. The effect of plastic deformation on the color center density in irradiated $\mathrm{LiF}$ and $\mathrm{KCl}$ crystals
    
    Fizika Tverdogo Tela, 28:5 (1986),  1533–1534
49. Effect of the sign deformation change on edge dislocation behavior in $\mathrm{LiF}$ crystals
    
    Fizika Tverdogo Tela, 25:5 (1983),  1339–1343