Kadomtsev Andrei Georgievich

Publications in Math-Net.Ru

1. Закономерности изменения модуля Юнга и микропластических свойств титана ВТ1-0 с разной структурой при циклическом нагружении
   
   Pisma v Zhurnal Tekhnicheskoi Fiziki, 52:5 (2026),  28–32
2. Energy release produced by the accumulation of microcracks in impact damaged heated cement stone
   
   Fizika Tverdogo Tela, 67:10 (2025),  1899–1902
3. Volume-temperature dependence of electrical resistance and thermal conductivity of vanadium at high pressures
   
   Fizika Tverdogo Tela, 67:5 (2025),  781–789
4. Impact damage of cement rock subjected to short-time uniaxial compressing
   
   Fizika Tverdogo Tela, 67:2 (2025),  276–279
5. Evolution of nanoporosity, Young's modulus and microplastic properties of nanostructured titanium VT1-0 during creep
   
   Pisma v Zhurnal Tekhnicheskoi Fiziki, 51:17 (2025),  3–6
6. Research of fatigue failure of sub- and microcrystalline titanium ВТ1-0 after its treatment with high hydrostatic pressure
   
   Fizika Tverdogo Tela, 66:12 (2024),  2317–2320
7. Acoustic emission from impact-induced damaged rock cement compressed orthogonally to shock action
   
   Fizika Tverdogo Tela, 66:11 (2024),  1879–1882
8. Effect of annealing on mechanical, elastic and microplastic properties of aluminum alloy AD1 in various structural states
   
   Fizika Tverdogo Tela, 66:6 (2024),  1008–1016
9. The effect of thermomechanical effects on nanoscale discontinuities and mechanical properties of an amorphous Ni-based alloy obtained by ultrafast quenching
   
   Fizika Tverdogo Tela, 65:11 (2023),  1989–1994
10. Influence of the structural state on the elastic and microplastic properties of aluminum alloy AD1
    
    Fizika Tverdogo Tela, 65:8 (2023),  1383–1387
11. Study of the structural features of microcrystalline aluminum after tests for long-term strength
    
    Fizika Tverdogo Tela, 65:1 (2023),  131–137
12. Frequency dependence measuring of skin-effect on metal wires with circular cross-section
    
    Zhurnal Tekhnicheskoi Fiziki, 93:8 (2023),  1188–1192
13. Evolution of the defective structure during long-term loading of ultrafine-grained titanium VT1-0 obtained by intensive plastic deformation
    
    Fizika Tverdogo Tela, 64:11 (2022),  1799–1803
14. Variation of the micromechanics of impact fracture of MgAl$_2$O$_4$ in response to the applied hot isostatic pressing
    
    Fizika Tverdogo Tela, 64:10 (2022),  1508–1513
15. Formation of “primary” cracks upon fracture of quartz
    
    Fizika Tverdogo Tela, 64:8 (2022),  1022–1025
16. Influence of the crystallographic orientation of silicon on the formation of “primary” cracks
    
    Fizika Tverdogo Tela, 64:5 (2022),  560–563
17. Temporal pattern of microcracking in impact-damaged porous SiC ceramics
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 48:11 (2022),  45–48
18. Investigation of the effect of nanosecond laser pulses processing on the microstructure and fatigue resistance of commercially pure titanium
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 48:2 (2022),  15–19
19. Influence of the structural state and oxide coating on the mechanical stability of VT1-0 titanium under its cyclic loading
    
    Fizika Tverdogo Tela, 63:11 (2021),  1901–1905
20. “Nucleation” cracks on the surface of a silicon crystal
    
    Fizika Tverdogo Tela, 63:10 (2021),  1594–1597
21. Fracto- and photoluminescence of quartz during its fracture
    
    Fizika Tverdogo Tela, 63:8 (2021),  1120–1125
22. Studying the influence of nanosecond pulsed laser action on the structure of submicrocrystalline titanium
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 47:14 (2021),  21–25
23. Regularities of friction of multiscale composite materials containing highly dispersed particles of fullerene soot
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 47:5 (2021),  7–11
24. Formation of nanoscale cracks and fractoluminescence upon destruction of carbon ceramics
    
    Fizika Tverdogo Tela, 62:11 (2020),  1860–1864
25. Changes in the defective structure of the surface of a Fe$_{77}$Ni$_{1}$Si$_{9}$B$_{13}$ metal glass ribbon under the influence of hydrostatic pressure and isothermal annealing
    
    Fizika Tverdogo Tela, 62:11 (2020),  1781–1786
26. Evolution of a defect structure during creep tests of ultrafine-grained metals and alloys produced by severe plastic deformation
    
    Fizika Tverdogo Tela, 62:2 (2020),  267–273
27. The influence of dynamic preload on the fatigue endurance limit of AMg6 alloy
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 46:8 (2020),  44–46
28. Acoustic and electromagnetic emissions at impact damage of super hard SiC and AlMg$_{2}$O$_{4}$ ceramics
    
    Fizika Tverdogo Tela, 61:10 (2019),  1763–1766
29. The effect of equal channel angular extrusion and hydrostatic pressure on the elastic and microplastic properties of a Cu–0.2 wt%Zr alloy
    
    Zhurnal Tekhnicheskoi Fiziki, 89:10 (2019),  1563–1566
30. The influence of heat treatment on the elastic and microplastic properties of ultrafine-grained titanium with variable content of impurities
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 45:22 (2019),  47–50
31. Effect of processing by femtosecond pulsed laser on mechanical properties of submicrocrystalline titanium
    
    Zhurnal Tekhnicheskoi Fiziki, 88:3 (2018),  396–401
32. Effect of heat treatment and tension on the surface morphology of thin Pt foils
    
    Nanosystems: Physics, Chemistry, Mathematics, 9:1 (2018),  58–60
33. Influence of the temperature of straining in a Bridgman chamber on peculiarities of the defect structure formation in commercial-grade titanium
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 44:20 (2018),  70–78
34. Internal friction, Young's modulus, and electrical resistivity of submicrocrystalline titanium
    
    Fizika Tverdogo Tela, 59:12 (2017),  2358–2362
35. Defect structure and thermomechanical stability of nano- and microcrystalline titanium obtained by different methods of intense plastic deformation
    
    Fizika Tverdogo Tela, 59:5 (2017),  935–941
36. Effect of the state of internal boundaries on granite fracture nature under quasi-static compression
    
    Fizika Tverdogo Tela, 59:5 (2017),  920–930
37. Elastic and microplastic properties of titanium in different structural states
    
    Zhurnal Tekhnicheskoi Fiziki, 87:9 (2017),  1362–1366
38. Effect of the allotropic transition in titanium on its interatomic interaction energy
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 43:15 (2017),  49–56
39. Defect structure and mechanical stability of microcrystalline titanium produced by equal channel angular pressing
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 43:1 (2017),  38–44
40. Impact fracture of ZnSe ceramics
    
    Fizika Tverdogo Tela, 58:10 (2016),  1969–1972
41. Effect of a defect structure on the static and long-term strength of submicrocrystalline VT1-0 titanium fabricated by plastic deformation during screw and lengthwise rolling
    
    Zhurnal Tekhnicheskoi Fiziki, 85:1 (2015),  66–72
42. Durability and static strength of microcrystalline titanium VT1-0 obtained by equal-channel angular pressing
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 41:2 (2015),  58–63
43. Mechanical properties and structural features of nanocrystalline titanium produced by cryorolling
    
    Fizika Tverdogo Tela, 56:8 (2014),  1539–1545
44. Kinetics of defect accumulation and duality of the Weller curve in gigacycle fatigue of metals
    
    Zhurnal Tekhnicheskoi Fiziki, 84:3 (2014),  89–93
45. Formation of different surface reliefs of metallic glasses under mechanical stress
    
    Fizika Tverdogo Tela, 55:4 (2013),  729–735
46. Elastoplastic properties of a low-modulus titanium-based $\beta$ alloy
    
    Zhurnal Tekhnicheskoi Fiziki, 83:10 (2013),  38–43
47. Deviations from the Gutenberg–Richter law
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 39:2 (2013),  29–35
48. Elasto-plastic properties of Cu–Nb nanolaminate
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 38:3 (2012),  88–94
49. Fracture features of granite under various deformation conditions
    
    Fizika Tverdogo Tela, 53:9 (2011),  1777–1782
50. Mechanical properties, density, and defect structure of VT1-0 titanium after intense plastic deformation due to screw and longitudinal rollings
    
    Zhurnal Tekhnicheskoi Fiziki, 81:11 (2011),  58–63
51. Effect of hydrostatic pressure on defect structure and durability of ultrafine-grained aluminum
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 37:20 (2011),  75–79
52. Effect of counterpressure during equal-channel angular pressing on nanoporosity formation in ultrafine-grained copper
    
    Pisma v Zhurnal Tekhnicheskoi Fiziki, 37:16 (2011),  52–55
53. Possible manifestations of quantum effects in the boron microindentation kinetics
    
    Zhurnal Tekhnicheskoi Fiziki, 80:11 (2010),  133–139