Abstract:
An experimental investigation is reported of the etching of sapphire assisted by copper-vapour laser radiation (λ = 510 nm, pulse duration 10 ns, repetition rate 8 kHz). Sapphire was etched by irradiation, with a focused laser beam, of the interface between sapphire and an absorbing liquid. Self-modulation of the etching channel depth was observed during scanning with a laser beam. A study was made of the dynamics of formation of etching channels and of the reasons for self-modulation. The etching rate reached 2 mm s–1 (0.3 μm pulse–1) and the spatial resolution of the etch pattern was about 3 μm. Copper was reduced on the etched sapphire surface from a solution suitable for chemical electroless copper plating. The resultant copper film adhered well (18 N mm–2) to the sapphire surface.
Fulltext:
PDF file (209 kB)
