This article is cited in 34 papers

Polymers

Porous structure, permeability, and mechanical properties of polyolefin microporous films

G. K. Elyashevich^a, I. S. Kuryndin^a, V. K. Lavrentyev^a, A. Yu. Bobrovsky^b, V. Bukošek<sup>c

a</sup> Institute of Macromolecular Compounds, Russian Academy of Sciences, St. Petersburg
^b Lomonosov Moscow State University
^c University of Ljubljana, Faculty for Natural Sciences and Engineering, Ljubljana, Slovenia

Abstract: Microporous films of polyolefins, namely, polyethylene and polypropylene, have been prepared using the process based on the extrusion of the melt with the subsequent annealing, uniaxial extension, and thermal fixation. The influence of the conditions used for preparation of the films on their morphology, porosity, number and sizes of through-flow channels, and mechanical properties has been investigated. It has been found that a significant influence on the characteristics of the porous structure of the films is exerted by the degree of orientation of the melt at extrusion, the annealing temperature, and the degree of uniaxial extension of the films. The threshold values of these parameters, at which through-flow channels are formed in the films, have been determined. It has been shown using filtration porosimetry that polyethylene films have a higher permeability to liquids as compared to the polypropylene samples (240 and 180 L/(m$^2$ h atm), respectively). The porous structure of the polyethylene films is characterized by larger sizes of through pores than those of the polypropylene samples (the average pore sizes are 210 and 160 nm, respectively), whereas the polypropylene films contain a larger number of through-flow channels.

Received: 22.12.2011
Accepted: 29.02.2012

 English version: Physics of the Solid State, 2012, 54:9, 1907–1916

Bibliographic databases:

•