RUS  ENG
Full version
JOURNALS // Fizika Tverdogo Tela // Archive

Fizika Tverdogo Tela, 2024 Volume 66, Issue 10, Pages 1713–1720 (Mi ftt10450)

Dielectrics

The influence of heat treatment on the memristive properties of Cu/(Co$_{40}$Fe$_{40}$B$_{20}$)$_x$ (SiO$_2$)$_{100-x}$/LiNbO$_3$/Cr/Cu/Cr capacitor structures

A. V. Sitnikovab, Yu. E. Kalinina, I. V. Babkinaa, A. E. Nikonova, A. R. Shakurova, M. N. Kopytina

a Voronezh State Technical University, Voronezh, Russia
b National Research Centre "Kurchatov Institute", Moscow, Russia

Abstract: The paper reveals the results of a study of the effect of heat treatment up to 500$^\circ$C on the memristive properties of Cu/(Co$_{40}$Fe$_{40}$B$_{20}$)$_x$ (SiO$_2$)$_{100-x}$/LiNbO$_3$/Cr/Cu/Cr/glass-ceramic capacitor type structure. It has been shown that heat treatment up to 350$^\circ$C for 60 min does not change the cyclic endurance of the samples $(>10^4)$, increases the ratio of the high-resistance resistive state $(R_{off})$ to the low-resistance resistive state $(R_{on})$ from 25 in the original state to 60 in the heat-treated state and reduces the values of resistive switching voltages to $\pm$4 V. Heat treatment also increases stability parameters $R_{on}(t)$, $R_{off}(t)$. Annealing at temperatures above 350$^\circ$C leads to a significant increase in resistive switching voltages. This process is determined by a significant increase in $\rho$ of the NC during annealing in the temperature range from 400 to 500$^\circ$C.

Keywords: resistive switching, memristors, nanocomposite, lithium niobate.

Received: 19.07.2024
Revised: 10.08.2024
Accepted: 11.08.2024

DOI: 10.61011/FTT.2024.10.59076.199



Bibliographic databases:


© Steklov Math. Inst. of RAS, 2026