This article is cited in 5 papers

Dependences of the detonation velocity and propellant performance of metallized explosives on the charge density and additive content

V. Yu. Davydov, A. S. Gubin

Research Institute of Mechanical Engineering, Moscow, 125212, Russia

Abstract: The dependences of the detonation velocity and the propellant performance measured using the M-40 technique on the charge density for aluminized explosives with different mass fraction of Al were studied. The fractions of the energy of Al combustion utilized during the chemical reactions and during the acceleration of the flyer plate were estimated. Regression dependences of the detonation velocity and the propellant performance on the charge density were obtained. The effect of the addition of particulate Al, Ti, Zr, and W in an amount of 5–30% on the detonation velocity of high-density explosive charges based on plasticized RDX was investigated. It is found that the reduction in the detonation velocity with the addition of various metallic additives is determined by the longitudinal sound velocity of the additive, and not by its density. Simple formulas for calculating the detonation parameters of high-density metallized explosives were obtained.

Keywords: detonation velocity, propellant performance, explosives, density, sound velocity, particulate aluminum.

UDC: 534.222.2

Received: 16.10.2013
Revised: 10.02.2014

 English version: Combustion, Explosion and Shock Waves, 2014, 50:5, 612–621

Bibliographic databases:

•